TOOL BOX WITH LOCKS, HINGES
- SKU: KTB006
- CATEGORY: Toolboxes
- TAGS: Toolboxes, All, Kenworth - Toolboxes, Kenworth - All Kenworth Parts, International - Toolboxes, International - All International Truck Parts, Peterbilt - Toolboxes, Peterbilt - All Peterbilt Parts, Freightliner - Toolboxes, Freightliner - All Freightliner Parts, Volvo - Toolboxes, Western Star - All Western Star Parts
With an aluminium cam lock rod that accepts a personal padlock, this Heavy Duty Truck Tool Box is made to safeguard and preserve tools and equipment in a variety of applications. Built with 0.125" thick aluminium, the tough truck toolbox has an oversized 1/4" pin and a bolt-on continuous hinge made of stainless steel. Your equipment is shielded from dirt and moisture by an integrated rain gutter and automotive bulb seal.
- Heavy Duty Truck Box with Double Barn Door
- Easy Installation on Any Truck or Trailer;
- Available in Different Sizes: 1. 24"X24"X60" 2. 30"X24"X60"
- Different sizes sold separately
- Enables the use of a personal padlock (separately purchased)
- Mounts on either the driver's or passenger side
- Sturdy, corrosion-resistant 0.125" thick smooth aluminium cam-lock hardware
- Unobstructed Box Opening Without Centre Post;
- Bolt-On Continuous Hinge Made of Stainless Steel;
- Large 1/4" Pin Built-In Rain Gutter with Automotive Bulb Seal
Dimentions
*Made of high-strength premium aluminum alloys.
*Silver color
*Rectangular shape
*Opening Mechanism-Hinge
*Closure Type-Latch
*Shipping is available at additional cost.
*No returns on special orders.
*A restocking charge of 20% or greater applies on all returned goods.
Cleaning your semi truck aluminium tool box on a regular basis is crucial to keeping it in good condition for an extended period of time. We are aware that your aluminium tool boxes can become rather dirty due to several factors such as the type of material you carry, the roads you drive on, and the weather. Below is the tips that are generally safe for cleaning smooth aluminum surfaces, phosphoric acid is a strong acid and should be used with caution. Here are some tips for using these cleaning agents on your smooth aluminum cam lock underbody tool box:
-
Dish Soap and Vinegar:
-
Mix a solution of mild dish soap and water. Use a soft sponge or cloth to gently scrub the surface of the aluminum. This can help remove general dirt and grime without causing damage.
-
Vinegar can be diluted with water (1:1 ratio) to create a mild acid solution. Apply the mixture with a sponge or soft cloth and gently rub the aluminum surface. Rinse thoroughly with water afterward.
-
After cleaning, make sure to dry the tool box completely to prevent water spots and streaks.
-
-
Phosphoric Acid (Caution Required):
-
Phosphoric acid can be effective for removing oxidation and corrosion from aluminum surfaces, but it is a strong acid and should be handled with care.
-
If you choose to use phosphoric acid, always follow the manufacturer's instructions and wear appropriate protective gear, such as gloves and eye protection.
-
Dilute the phosphoric acid according to the instructions on the product. Typically, a dilution of 10-15% acid to water is recommended.
-
Apply the diluted phosphoric acid to the aluminum surface using a non-abrasive sponge or cloth. Allow it to sit for a short period (as specified by the product instructions) and then rinse thoroughly with water.
-
After using phosphoric acid, neutralize the surface by washing it with a baking soda and water solution. This helps to counteract any remaining acid.
-
Be aware that using phosphoric acid too frequently or in high concentrations can potentially damage the aluminum surface. Always test a small, inconspicuous area first and observe any manufacturer warnings.
-
